Home - Knowledge - Details

Solution to poor heat sealing strength during bag making machine operation

If poor heat sealing strength occurs during the operation of the bag making machine, we generally take the following measures to deal with it:
1 Promote the hardening of the adhesive through thermal insulation aging and improve the composite strength and heat resistance of the composite film.
2. Select the best heat sealing conditions or improve the heat sealing method according to the structure and heat sealing status of the composite film. Cool immediately after heat sealing.
3. Check the shelf life and storage conditions of the heat sealing layer film. Pay special attention if the heat sealing layer uses films from old batch numbers and films that have been heat sealed.
4. Increase the thickness of the heat sealing layer film.
5. Change the type and grade of the heat sealing layer film and use an inner sealing layer film with anti-pollution heat sealing properties.
6 Check whether the grade of adhesive meets the requirements.
7. Improve the heat sealing performance of the heat sealing layer, control the content of slip agent, and use mLLDPE film.
8. Control the monomer content of MDI in the composite adhesive.
9 Check the heat seal treatment.

Send Inquiry

You Might Also Like